home Home library_books Notes style Projects photos Photos Table Of Contents WaffleFPV Building A Video Out Cable Download Links Firmware Update Related Articles The Taranis Q X7 is Real Turnigy Reaktor 250W Charger Omnibus F3 Pro BlHeli CleanFlight ESC Calibration The Ultimate Micro Quadcopter Guide Falcon 120 Xiaomi Yi -- The Ant Camera Smile 48

This is a guide to the Xiaomi Yi action camera.

Xiaomi Yi camera


The user WaffleFPV over at FPVLab.com wrote an awesome custom script that massively improves the recording quality of the camera.

You can read the thread here: http://goo.gl/f41uoC, but basically:

Building A Video Out Cable

  • Pin #4 -- Video out (the center in a normal RCA jack)

  • Pin #5 -- Ground

Firmware Update

  • Copy the firmware downloaded above to the root of your microsd card

  • Rename it firmware.bin

  • Turn your Yi on and plug it into the power cord (USB), I didn't use a computer for this, but a wall-to-usb brick

    • It will work without plugging in the Yi, if it is charged enough. However, flashing seems to always work when plugged into power
  • It will start beeping constantly for a minute or so then the light will flash red on the front and the camera turn off. Wait until the camera turns off if it is beeping constantly. Losing power during flashing could brick your camera

  • firmware.bin will be deleted after it flashes successfully, so you're good to go!

Hope this was helpful. If so, feel free to checkout my YouTube channel, get updates when a new article is posted by following on Feedly and read the the other guides at nathan.vertile.com/blog